www.pulsar.pl
HPSBOC1824B
5
Surge protection
varistors
Overvoltage protection OVP
>32V (automatic recovery)
Excessive discharge protection UVP
U<19 V (± 5%) – disconnection of battery terminal
Tampering protection system:
- TAMPER – indicating unwanted opening of the
PSU’s enclosure
- a microswitch, NC contacts (enclosure closed)
0,5A@50V DC (max.)
LED indication:
- AC diode indicating AC power status
- AUX diode indicating DC power status at
the PSU output
- red, normal status – on, failure: off
- green, normal status – on, failure: off
Technical outputs:
- FAC; output indicating AC power failure
- FPS; output indicating DC absence/PSU failure
-FLB output indicating battery low voltage
- relay type: 1A@ 30VDC/50VAC, time lag: approx. 10s.
CAUTION! In Fig.2. the contact set in the potential-free
status corresponds to a state with no AC power (AC
power failure).
- OC type, 50mA max., normal status: L (0V) level,
failure: hi-Z level, time lag: 10s.
- OC type, 50mA max., normal status: L (0V) level,
failure: hi-Z level
- OC type, 50mA max., normal status: (U
BAT
>23V):
L (0V) level,
failure: (U
BAT
<23V): hi-Z level
Mechanical parameters (tab. 4)
Enclosure dimensions
285 x 297 x 80+8 (280 x 292 x 80) (WxHxD)
Fixation
See figure 3
Fitting battery
2x 7Ah/12V (SLA) max.
Net/gross weight
2,20kg / 2,40kg
Enclosure
Steel plate, DC01 0,7mm colour: RAL 9003
Closing
Cheese screw x 2 (at the front), (lock assembly possible)
Connectors
Power-supply:
Φ
0,63-2,50 (AWG 22-10)
Outputs :
Φ
0,63-2,50 (AWG 22-10)
Battery output BAT: 6,3F-2,5
TAMPER output: wires
Notes
The enclosure does not adjoin the assembly surface so that cables can be led
Operation safety (tab.5)
Protection class PN-EN 60950-1:2007
I (first)
Protection grade PN-EN 60529: 2002 (U)
IP20
Electrical strength of insulation:
- between input and output circuits of the PSU (I/P-O/P)
- between input circuit and PE protection circuit (I/P-FG)
- between output circuit and PE protection circuit (O/P-FG)
3000 V/AC min.
1500 V/AC min.
500 V/AC min.
Insulation resistance:
- between input circuit and output or protection circuit
100 M
Ω
, 500V/DC
Operating parameters (tab.6)
Operating temperature
-10ºC...+40ºC (see: chart 1)
Storage temperature
-20ºC...+60ºC
Relative humidity
20%...90%, without condensation
Vibrations during operation
unacceptable
Impulse waves during operation
unacceptable
Direct insulation
unacceptable
Vibrations and impulse waves during transport
According to PN-83/T-42106
