2
1. Technical description
The
DC/DC 5A
(
DC/DC50SE-SEP)
voltage- step up / step down converter is used for maintaining a constant output voltage
12V DC
, regardless of the input voltage fluctuations in the range of
9,5V÷16V DC. When the input voltage at the output is lower to 12V
DC, the converter increases it to the value. When the input voltage at the output is higher than needed, the converter lowers it to 12V
DC. The maximum load current is
Imax=5A (Pmax= 60W).
The module feature galvanic isolation between input/output (IN-AUX).
1.1. Block diagram (Fig. 1).
Fig.1. Block diagram of the converter
’s module.
1.2. Description of components and connectors (Fig. 2, Table 1, Table 2).
Table 1.
No.
[Fig. 2]
Component’s description
[1]
IN LED
light
- red
[2]
Power connector of the DC/DC module
[3]
AUX LED
light
– green
[4]
The DC/DC module’s connector
[5]
Mounting strip
Table 2.
[2], [5]
Description of module’s connectors
+IN
- IN
DC supply input
(
9,5V÷16V DC, power consumption from the power source)
+AUX
- AUX
DC supply output 12V DC
(+AUX= +U, -AUX=GND)
Fig.2. The converter
module’s view.
1.3. Technical parameters:
- Electrical parameters (Table 3)
- Mechanical parameters (Table 4)
