Caution!
Prior to entering installation it is necessary to make sure if the voltage
in the 230 V/AC circuit is disconnected.
All service works inside the housing must be carried out with 230V/AC supply voltage
disconnected.
1. Mount the transformer on DIN holder (use screw, bolt).
2. Mount the transformer with DIN – TH35/TS35
3. Supply conductors ~230V should be connected to
230V / AC L-N
terminals of transformer.
4. Connect the output transformer to a device, using installed cables
Remarks:
If necessary, make other connections required for the correct type of system / device.
5. If necessary, make other connections required for the correct type of system / device.
Remarks:
consistent with requirements and recommendation of the producer.
6.
Start the system (switch on ~230V), adjust or configure: according to procedure of the producer’s
system.
3. Parametry techniczne / Technical data:
PARAMETRY TECHNICZNE / TECHNICAL DATA
Kod / Code
Nazwa/ Name
Wymiary / Dimensions
W x H x D
[mm] (+/- 2mm)
Waga (netto / brutto)
Weight (net / gross)
[kg]
Uwagi / Notes
AW0 466
Uchwyt/holderDIN
TRP/TRZ20-40VA
92 x 126 x 17
0,10 / 0,13
ABS+stal
ABS+steel
AW0 467
Uchwyt/holderDIN
TRZ/TOR50-150VA
97 x 140 x 17
0,13 / 0,16
PRODUCENT / PRODUCER
Pulsar K.Bogusz Sp.j.
Siedlec 150,
32-744 Łapczyca, Poland
Tel. (00 48) 14-610-19-40, Fax. (00 48) 14-610-19-50
www.zasilacze.pl