6
5
FUNCTIONS OF CONTROL BUTTONS
5
Device is off
OTHER SHORT
PRESSES
LONG PRESS
Turn display off/
Power device off
CURRENT
OPERATING MODE
FIRST SHORT
PRESS
Power device on Calibrate the sensor
Display OFF
mode
Turn display on
Calibrate the sensor
Device is on
Calibrate the sensor
Regular
Regular
Menu
navigation
Menu
navigation
Navigation upwards/rightwards
Switch between
colour palettes
Regular
Menu
navigation
Enter quick menu
Switch between
quick menu options
Confirm selection
Enter main menu
Control incremental digital zoom
PiP on/off
Navigation downwards/leftwards
Video
Start video
recording
Pause / resume
video recording
Stop video recording /
Switch to photo mode
Photo
Take a photograph
Switch to video mode
BUTTON
ON/OFF
(1)
UP (2)
MENU
(3)
DOWN
(5)
REC
(4)
Rangefinder
----
Activate rangefinder
Measure distance
Start/stop
SCAN mode
----
----
Accolade LRF
thermal imaging binoculars are supplied with a
rechargeable Li-Ion Battery Pack IPS5 which allows operation for up to
7 hours. Please remember to charge the Battery Pack before first use.
6
Charging:
USING THE BATTERY PACK
Lift the lever
(C)
of the charging base.
Remove the protective cover from the Battery Pack.
Install the Battery Pack into the charging base as shown in Pic.2;
click the lever
(C).
Upon installation, a green
LED
indicator
(D)
on the charging base
will start to glow and begin flashing:
-
once
if the battery charge ranges from
0% to 50%
;
-
twice
if the battery charge ranges from
51% to 75%
;
-
three times
if the battery charge ranges
from 76% to 100%
;
If the indicator lights green continuously, the battery is fully charged.
You can remove the battery from the charger by lifting the lever
(10)
.
If the indicator of the charger lights
red
continuously upon battery
installation, probably the battery's charge level is lower than
acceptable (the battery has been long in deep discharge).
Keep the battery in the charger for a long time (up to several hours),
remove and re-insert it. If the indicator starts blinking
green
, the
battery is good; if it keeps lighting
red
it's defective.
Do not use the battery!
Connect the Micro-USB plug of the USB cable to the port
(E)
of the
charger.
Connect the Micro-USB plug to the charger.
Insert the plug of the charger to the 220V socket.
Содержание Accolade LRF XQ38
Страница 1: ...www pulsar nv com ACCOLADE LRF Thermal Imaging Binoculars ...
Страница 92: ......