www.pulsar.pl
EN54-3A28LCD
RED POWER
31
-
press the „SET” button, the prompt will appear at the end of the line
-
use the „<” or „>” buttons to set the delay time:
- 10s
- 1min
- 10min
- 30min
-
confirm by pressing the „SET” button
7.2.5. Setting the communication address
applies to cooperation with PowerSecurity.
All power supplies are factory-set to address 1.
All the parameters responsible for communication between the PSU and the computer, namely the
address, parity and speed should have the same settings for both the PSU and the PowerSecurity program.
Communication address allows to identify power supply units in the same communication network.
-
use the „<” or „>” buttons to display the
Communication address
menu
-
press the „SET” button, the prompt will appear at the end of the line
- use the
„<” or „>” buttons to set the communication address
1÷ 247
– PSU address during the communication with the computer
-
confirm by pressing the „SET” button
