ZM13.SIDE Installation Manual
Mounting Example – Wall Mounting
Mounting Example – DIN-Rail Mounting
Installation Instructions
1)
Detach the two aluminium brackets by removing the four screws with a Torx screwdriver (Torx 10). Save the screws for step 3.
2) Remove the plastic lock mechanism by using a flat-blade screwdriver to move the lock downwards while at the same time push the plastic slide
upwards. Detach the plastic slide.
3) Mount the steel brackets with the same screws from the DIN-Rail brackets using caution not to over-tighten the screws! Recommended
tightening torque is 0.6Nm. (5.3lb.in).
Preparation for DIN-Rail mounting
Install the two aluminium brackets and the plastic slide (detached from the unit before) onto the side mounting plant with the additional screws
provided.
Installation Instructions
Drawing shows a similar unit
