PIM60.241
Feb. 2022 / Rev. 2.0 DS-PIM60.241-EN
www.pulspower.com
13 / 17
All parameters are specified at 24V, 2.5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
15. Environment
Operational temperature
-10°C to +70°C (14°F to 158°F)
The operational temperature is the ambient or
surrounding temperature and is defined as the
air temperature 2cm below the device.
Storage temperature
-40°C to +85°C (-40°F to 185°F)
For storage and transportation
Output derating
0.06A/°C
B60°C and +70°C (140°F to 158°F)
0.15A/1000m or 5°C/1000m
For altitudes >2000m (6560ft), see Fig. 15-2
The derating is not hardware controlled. The user has to take this into consideration to
stay below the derated current limits in order not to overload the unit.
Humidity
5 to 95% r.h.
According to IEC 60068-2-30
No condensation allowed.
Atmospheric pressure
110-54kPa
See Fig. 15-2 for details
Altitude
Up to 5000m (16 400ft)
See Fig. 15-2 for details
Over-voltage category
II
According to IEC 60664-1, for altitudes
<5000m
Impulse withstand voltage
4kV (according to over-voltage
category III)
Input to PE
According to IEC 60664-1, for altitudes
<2000m
Degree of pollution
2
According to IEC 60664-1, non conductive
Vibration sinusoidal
2-17.8Hz: ±1.6mm
17.8-500Hz: 2g
2 hours / axis
According to IEC 60068-2-6
Shock
30g 6ms, 20g 11ms
3 bumps / direction, 18 bumps in total
According to IEC 60068-2-27
Shock and vibration is tested in combination with DIN rails according to EN 60715 with
a height of 15mm and a thickness of 1.3mm.
Fig. 15-1: Output power vs. ambient temp.
Fig. 15-2: Output power vs. altitude