Puls MiniLine-2 Series, Руководство пользователя, Страница: 6 / 21

ML120.244
MiniLine-2
24V, 5A, S
INGLE
P
HASE
I
NPUT
6. O
UTPUT
Output voltage nom. 24V
Adjustment range min. fixed no adjustment included
Factory setting 24.5V ±3%, at full load, cold unit
Line regulation max. 10mV 85-264Vac
Load regulation max. 100mV static value, 0A
Æ
5A
Ripple and noise voltage max. 50mVpp 20Hz to 20MHz, 50Ohm
Output capacitance typ. 3 000μF
Output current nom. 5A at 24V, see Fig. 6-1
nom. 4.3A at 28V, see Fig. 6-1
peak 25A The full output voltage cannot be maintained and the
output voltage will drip to lower values. Detailed
curves can be found in chapter22.1.
Output power nom. 120W
Short-circuit current min. 7.8A load impedance 200mOhm, see Fig. 6-1
max. 9.2A load impedance 200mOhm, see Fig. 6-1
max. 8.5A load impedance <10mOhm, see Fig. 6-1
Fig. 6-1 Output voltage vs. output current,
typ.
Output Voltage
0
0 2 4
4
8
12
28V
16
20
24
8A 5 3 1 6 7
Output Current
Apr. 2013 / Rev. 1.1 DS-ML120.244-EN
All parameters are specified at 24V, 5A, 230Vac input, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
6/21