Puls BC-12245, Руководство по эксплуатации

Страница: 6 / 13

T OUCH TO STAR
4

Always check that the charger has switched to charging end, before leaving the charger
unattended and connected for long periods. If the charger has not switched to charging
end within 50 hours, this is an indication of an error. Manually disconnect the charger.

Batteries consume water during use and charging. For batteries where water can be
added, the water level should be checked regularly. If the water level is low, add distilled
water.

This appliance is not designed for use by children or people who cannot read or under-
stand the manual unless they are under the supervision of a responsible person to
ensure that they can use the battery charger safely. Store and use the battery charger out
of the reach of children, and ensure that children cannot play with the charger.

Connection to the mains supply must be in accordance with the national regulations for
electrical installations .
Connect and disconnect the charger from a battery. Info
If the battery clamps are incorrectly connected, the reverse polarity protection will ensure
that the battery and charger are not damaged.
For batteries mounted inside a vehicle
1. Connect the red clamp to the battery's positive pole.
2. Connect the black clamp to the vehicle chassis remote from the fuel pipe and the
battery.
3. Connect the charger to the wall socket.
4. Disconnect the charger from the wall socket before disconnecting the battery.
5. Disconnect the black clamp before the red clamp.
Some vehicles may have positively earthed batteries
1. Connect the black clamp to the battery's negative pole.
2. Connect the red clamp to the vehicle chassis remote from the fuel pipe and the battery.
3. Connect the charger to the wall socket.
4. Disconnect the charger from the wall socket before disconnecting the battery.
5. Disconnect the red clamp before the
black clamp .
130.com.ua
Autogood products «130»