Pulnix TM-1327GE series, Руководство по эксплуатации

Страница: 11 / 65

Page 3
Software Introduction
TM-1327GE Software
4.
A driver installation tool dialog box displays. Read the message about canceling found new devices
and then click “OK” .
Figure 1. Scanning for Drivers
5.
The Driver Installation Tool dialog box appears with a listing of all NIC cards on the system.
6.
Right click on the net driver desired for the camera. If the driver is an Intel Pro a high performance
option is available for install.
Figure 2. Intel Pro Install Choices
7.
Right click on the net driver desired for the camera.
8.
Select the desired driver install “Install High Performance IP Device Driver” or “ Install Intel
Network Driver” . The network installation options vary, based on the NIC card installed on the
system. A dialog box asks for verification of the selected install. Click “Yes”. Follow the instruc-
tions on any additional dialog boxes.
9.
For information on other network card installs click “Start”-->”JAI A.S”-->”Cam2Net”-->”Docu-
mentation”-->”Cam2Net IP Device Drivers”. An Acrobat file has instruction to help guide you
through the proper install.
10.
Go to “ Start” --> “Programs” --> “JAI AS” --> “Cam2Net ” --> “Launch Coyote application”
to launch the camera control tool.