Pubert DEVOR X60S-X55L, Руководство по эксплуатации

Страница: 28 / 72

13 - EN
1
Motor off, spark plug cable disconnected, fuel supply shut
VIII / TRANSPORT
2
the shredder must only be transported in a trailer.
use appropriate loading ramps.
tie the shredder down correctly using straps.
to unload, follow these instructions in reverse.
IX / CHANGING THE BLADES
(to be carried out by your approved service agent) (Wear gloves)
- disconnect the spark plug cable
- open the obstruction clearance hatch (see VI –e)
- remove the feeding chute (see VII)
- using a 5 mm allen key and a 13 mm open ended spanner, unscrew the 4 screws (1) and nuts (2) holding the 2 blades
in place (3).
- always replace the 2 blades at the same time.
Always replace the screws and nuts when replacing the blades.
(Warning: only blades and retaining screws specifically designed for your shredder must be used.)
- Mount the new blades, being sure not to forget the reinsert the balance weight (4) (tightening torque 24 n.M).
correctly align and place the 2 blades parallel to each other.
Do not lift the shredder
Tie-down points
for trailer transport
2
4
3
1