PTZ Optics VL-ZCAM, Руководство пользователя

Страница: 37 / 42

36
Hue
Hue 0-100. Use the slider control. The box on the right shows the corresponding numerical value. The Default
setting is 50.
Distortion
Adjusts the wide-angle-lens image distortion 0- 100. Use the slider control. The box on the right shows the
corresponding numerical value. The Default setting is 0.
Flip & Mirror
Check
the “
F
lip” box to invert the image vertically for a ceiling mount. Check the “Mirror” box to inve
rt the
image horizontally. The default setting is unchecked.
Apply, Cancel and Default Buttons
After adjusting the parameters, press the "Apply" button to save settings. Press the "Cancel" button to cancel the
adjustment of the parameters. Press the "Default" button to return to the default value.
1.3 Audio Setup
–
Note: Audio capability is not active on this model.
1.4 System Settings
Click
“
System
”
. The system parameters may now be set in the right side area.
1) Initialize
Work Mode : RTSP (Real Time Streaming Protocol) is the only streaming protocol currently supported.
Reboot : Click the "Reboot" button to initiate a system restart. This is required after changing some settings.
2) User
User and Password : The user can modify the password (letters and Numbers only).
The default settings are UserName: admin and Password: admin
Apply and Cancel Buttons
After modifying the parameters, press the "Apply" button to save. Press the "Cancel" button to leave settings
unchanged.