53
v1_1 rev 11-22
Maintenance and Troubleshooting
Camera Maintenance
•
If the camera will not be used for a long time, power off the camer.a
• Use a soft cloth or lotion-free tissue to clean the camera body.
• Use a soft, dry, lint-free cloth to clean the lens. If the camera is very dirty, clean it with a diluter
neutral detergent. DO not use any type of solvert or harsh detergent which may damage the
surface.
Unqualified Applications
• Avoid shooting at particularly bright objects, such as sunlight, lights, etc. for a long period of
time.
• Do not operate close to powerful electromagnetic radiation, such as TV or radio transmitters, etc.
Troubleshooting
• No image
1. Check whether the power cord is connected, voltage is OK, & Power LED is lit.
2. Check whether the camera can “self-test” after startup. You can also press [*] > [#] >
3. [Auto Focus] on the IR remote to trigger the camera to perform the startup dance on repeat.
4. If using SDI or HDMI, check that the desired connection is selected to output video. You
can select the desired connection from the OSD Menu or through the Web Interface.
5. Check that the video cable is connected correctly to th destination device
• Image is shaky or vibrating
1. Check whether the camera is mounted solidly or sitting on a steady horizontal and level
surface.
2. Check the building and any supporting furniture for vibration. Ceiling mounts are often
affected by building vibration more than wall mounts.
3.
Any external vibration that is affecting the camera will be more apparent when zoomed in.
• Abnormal display of image
1. Check the resolution dial on the back of the camera. Verify that the resolution and refresh
rate is supported by your destination device.
2. If using SDI, check that the SDI level is set to the desired level.
• Image settings are changing on their own
1. The cameras have a feature called “Preset 2.0” where many of the Exposure, White Bal-
ance, and Image settings are saved with each preset. When a preset is called, the saved
Exposure, White Balance, and Image settings are then loaded.
Содержание PT-STUDIOPRO
Страница 7: ...7 v1_1 rev 11 22 Dimensional Drawings...
Страница 45: ...45 v1_1 rev 11 22 Network Settings The Network Settings page accesses the LAN Settings NTP Settings sections...
Страница 47: ...47 v1_1 rev 11 22 NDI Config Settings The NDI Config Settings page accesses the camera s NDI settings...
