29
v1_1 rev 11-22
Network Connection
Operating Environment
• Operating System: Windows 7 / 8.1 / 10 / 11 Mac OS, Linux, Android
• Network Protocol: TCP/IP
• Client PC: P4 / 128M RAM / 40G HDD / , Supports scaled graphics card, Supports DirectX 8.0
or more advanced version.
Equipment Installation
1. Connect the camera to your network via a CAT5 or CAT6 cable directly to your network switch.
2. Turn on power.
3.
If successful, the orange network light will illuminate and the green light will start flashing.
4.
Picture 1.2 Connections to LAN via patch cable to LAN wall jack or LAN Switch
Finding the Camera’s IP Address
The camera will automatically acquire an IP address when connected to the network. If the network
cannot assign an IP address, the camera will default to “192.168.100.88”. If you don’t know the
camera IP, please do one of the following:
• Method 1: Use a Internet browser and type in “http://ptzoptics.local/” to reach the camera’s web
interface. From there, the Network Settings page will allow you to view the camera’s network
settings.
• Method 2: Connect camera to PC with network cable, use Upgrade Tool to search for IP
address.
.
Содержание PT-STUDIOPRO
Страница 7: ...7 v1_1 rev 11 22 Dimensional Drawings...
Страница 45: ...45 v1_1 rev 11 22 Network Settings The Network Settings page accesses the LAN Settings NTP Settings sections...
Страница 47: ...47 v1_1 rev 11 22 NDI Config Settings The NDI Config Settings page accesses the camera s NDI settings...
