PTS 9042x Series Small Cell
AC Power Distribution Load Centers
Installation Guide
26
All Rights Reserved, 2017
www.pactechsol.com/TMOVendor
888-820-3508
5.3 Re-Installing Dead Front Access Plate
5.3.1 Reinstall the Dead Front Access Plate and ensure that it is seated correctly.
5.3.2 Reinstall the Dead Front Access Plate set screw and tighten.
5.3.3 Check to ensure all breakers are sitting square in the dead plate opening
5.3.4 Check to ensure all blank breaker positions are covered
5.3.5 Label breaker positions as per customer requirements.
Figure 8: Dead Front Re-Installed
Caution: Installation shall be completed per all NEC and Local Codes. Do not install
PTS9042x Systems before reading and understanding all specifications and installation
guides provided. Installation should be performed by a qualified installer.
