III. SETUP, continued
How to Reset the Language
1.
Turn off the analyzer.
2.
Press and hold down Enter for approximately 5 seconds during the
analyzer power-up stage until LANGUAGE is displayed.
3.
Press Enter. Press Enter again to select English or press Next to scroll
through the language choices.
4.
Press Enter to select the desired language that is displayed.
How to Set the Date and Time
1.
If the analyzer is off, press either button to turn on the analyzer. Wait for
the display to read either INSTALL MEMO CHIP (if a current MEMo
Chip
®
is not installed) or INSERT STRIP (if a current MEMo Chip is
installed).
Note:
If RUN TEST is displayed, go to Step 3.
2.
Press Enter. The display will read RUN TEST.
3.
Press Next until SETTINGS is displayed.
4.
Press Enter, then press Next until SET TIME is displayed.
5.
Press Enter to display the date and the time, which is formatted as
YYYY/MM/DD and HH:MM.
6.
The display will then highlight the year. Press Enter to accept the
highlighted year, or press Next to advance the year. Press Enter to
select.
7.
The display will then highlight the month. Press Enter to accept the
displayed month, or press Next to advance the month. Press Enter to
select.
8.
The display will then highlight the day. Press Enter to accept the
displayed day, or press Next to advance the day. Then press Enter to
select.
16
