10 - Power On/Off Slider
Important:
pTron Sonor is set at 60% default volume. Please adjust the volume through the key panel on speaker.
Music playback time depends on the music style and music volume.
Power On & Pairing:
1. Power On the speaker by sliding the power key towards the left side.
2. Blue LED light will start blinking near to the charging port.
3. Open Bluetooth function on your Device and Search for the Available Bluetooth devices.
4. Click on ‘pTron BT Speaker’ to connect.
5. After getting connected with the device, LED light will be steady.
Power Off:
Power off the speaker by sliding the power key towards right side.
Note
: If there no device paired within 2 minutes, speaker will turn off automatically.
Bluetooth Connectivity - Automatic:
Just Turn On the Speaker. It will Automatically Connect to the Last Connected Device.
Note
: The last connected device must be on and the Bluetooth function must be active.
Modes
: There are 4 modes.
1. Bluetooth Mode
2. Play by TF card
3. Play by USB Drive
4. AUX Mode
Note
: TF card mode/3.5mm Aux mode/USB drive mode will get active when the corresponding device is
inserted into the corresponding port/slot.
Call & Music Functions:
Answer/Hangup a Phone Call: Press MFB Once
Reject a Phone Call: Press MFB for 2 seconds
Music Play/Pause: Press MFB once
Next Song: Press "+" button once
Previous Song: Press "-" button once
Volume Up: Long Press "+" key
Volume Down: Long Press "-
” key
Re-dial: Press MFB Twice in Standby mode
Modes: Press 'M' key once for Bluetooth & radio mode.
Face Light: Press light button to turn of the face light.
Note
:
1) MFB stands for Multi-function Button (Play/Pause button is MFB).
2) In radio mode, connect micro USB charging cable or Aux cable to the speaker to get better radio signal.
Charging the Speaker:
1. Connect the Micro USB cable to speaker.
2. Connect the USB end of the Charging cable to a Power Source such as USB Charger or other Charging
Devices of 5V Output.
3. Red LED light will be Steady during Charge.
Troubleshooting Scenario: Connectivity Issue:
1. Turn OFF the Speaker and charge 100%.
2. Unpair with the connected Bluetooth device.
3. Restart the Bluetooth device.
4. After 100% charging switch ON the speaker and pair it with the Bluetooth device again.
Warranty
Manufacturing defects in materials and workmanship of the product ONLY. This warranty applies when the
product is used under normal conditions and the purpose for which the product was designed.
Disclaimer
:
The colors and specifications shown/mentioned in the user manual may differ from the actual product. The
images shown are for representation purposes only. Other product logos and company names mentioned
herein may be trademarks or trade names of their respective owners.
