HDBaseT Extender
4
3. System Connection
3.1 Usage Precautions
1)
System should be installed in a clean environment and has a prop temperature and
humidity.
2)
All of the power switches, plugs, sockets and power cords should be insulated and
safety.
3)
All devices should be connected before power on.
4)
Use shielded straight-thru Cat5e/Cat6A cable with TIA/EIA T568B terminations for
good transmission effect.
3.2 System Diagram
Figure 3- 1 System Connection
3.3 Connection Procedures
Step1.
Connect HDMI source (such as Blue-ray DVD) to
HDMI IN
port of the transmitter
with an HDMI cable.
Step2.
Connect
TP OUT
port of the transmitter to
TP IN
port of the receiver through a
CAT5e/CAT6A cable.
Step3.
Connect a HDMI display (such as HDTV) to
HDMI OUT
port of the receiver with
HDMI cable.
Step4.
When using the bi-directional IR control, do the following.
a) Connect an IR receiver to the
IR IN
port at either the transmitter or the
receiver.
b) Connect an IR Emitter to the
IR OUT
port at the other end.
