DVI /Audio Matrix Switcher 8x8
PTN Electronics Limited
12
www.PTN-electronics.com
5. Switch off the detail feedback command from the COM port: /:MessageOff;
I
t will leave the “switch OK” as the feedback, when you switch the matrix.
6. Switch on the detail feedback command from the COM port: /:MessageOn;
It will show the detail switch information when send the commands.
7. Transfer signals from an input channel to the corresponding output
channel: [x]#.
Example: “5#.” to transfer signals from the input channel No.5 to the output channel
No.5.
8
、
Switch off an output channel: [x]$.
Example: “5$.” to switch off the output channel No.5.
9
、
Switch video signals command: [x1] V[x2].
Example: “3V5.” to transfer the video signals from the input channel No.3 to the output
channel No.5.
10. Switch audio signals command: [x1] A[x2].
Example:
“1A2.” to Transfer the audio signals from the input channel No.1 to the
output channel No.2.
11. Switch both video and audio signals synchronously: [x1] B[x2].
Example: “8B2,3,5.” to transfer both the video and the audio signals from the input
channel No.8 to the output channel No.2,3,5.
12. Inquire the input channel to the output channel [x]: Status[x].
Example:
“Status3.” to inquire the input channel to the output channel No.3.
13. Inquire the input channel to the output channels one by one: Status.
Example:
“Status.” to inquire the input channel to the output channels one by one.
14. Save the present operation to the preset command [Y]: Save[Y].
Example: “Save7.” to save the present operation to the preset command No.7.
15. Recall the preset command [Y]: Recall[Y].
Example: “Recall5.” to recall the preset command No.5.
16. Clear the preset command [Y]: Clear[Y].
Example: “Clear5.” to clear the preset command No.5.
