T•FOLD
User Guide
Page 17
1.5
Warning Label Types and Meanings
The handling, attachment locations, and types of warning labels are explained below.
Warning labels are attached to areas where care should be taken. Read and understand the positions
and contents thoroughly before maintenance operation.
1.5.1
Handling the Warning Labels
Make sure to note the following when handling the warning labels.
Make sure that all warning labels can be recognized. If text or illustrations cannot be seen clearly,
clean or replace the label.
When cleaning warning labels, use a cloth with water or neutral detergent. Do not use any solvent or
gasoline products.
If a warning label is damaged, lost, or cannot be recognized, replace the label.
Ref
Warning Label
Warning Label Type
A
Using this area as a lift point will cause
damage to the T•FOLD.
B
Do not touch anything in this area unless
instructed.
C
Dangerous voltages present in this area.
D
Fingers may be trapped and ripped off in
this area.
TABLE 2-1 WARNING LABEL TYPE
NOTE
Содержание T-FOLD
Страница 1: ......
