PTF PEPPER PTF 4 Скачать руководство пользователя страница 2

Information on the foil tunnel

Follow the OHS Rules

2

Wear protective gloves

during the assembly

Wear protective glasses

during the assembly

Provide help from the 

assistant  during the assembly

The temperature 

in the tunnel is high

Perform assembly 
on days which are not windy

It is prohibited to have 
the structure assembled 
by drunk and intoxicated personnel

 

Thank you that you have chosen PTF Polska tunnel. We believe that it will help you in growing your flowers and vegetables and that you will be satisfied a lot. 

We did our best so that the design and modern technical solutions are helpful in the cultivation and so that the assembly is simple and easy.

WARNING!

PTF POLSKA foil tunnels are not suitable for assembly in open spaces or locations where the structure will be exposed to strong winds. They must be assembled 
in a place protected against wind and not exposed to it directly – this will prevent its damage.

Do not leave the foil on the tunnel in the winter period because it may be damaged due to the pressure of snow.

Do not tie up the shrubs with crops to the framework (e.g. tomatoes) – this may impair the structure greatly.

Safe use rules:
1. The tunnel is dedicated only to plant growing.
2. Dig the foil excess in the ground – this will prevent the tunnel from being caught by the wind.
3. Mount the structure in the place not exposed to strong wind blows; avoid slopes and open spaces.
4. Do not assemble the tunnel in strong winds and in other adverse weather conditions.
5. Keep children away from the assembly site because the set includes small elements and foil bags which may lead to choking or suffocating.
6. Check the stability of the tunnel regularly, especially after storm winds. If you notice any damage, replace a damaged element or disassemble the structure.

7. Use assembly tools specified in the manual and wear protective gloves and glasses during the tunnel assembly and maintenance.

8. Avoid using mowers and mechanical scythes near the structure.
9. Do not keep hot objects, especially hot barbecue equipment, etc. in the tunnel.
10. Remove the foil from the tunnel for the winter season and secure the structure so that it is not caught by the wind.
11. Do not climb the structure roof.
12. Do not leave children unattended in the tunnel because the door may close and prevent children from exiting the structure.

13. Do not use open flame in or near the structure. 

14. Do not load roof panels additionally (with the exception of tied-up plants).
15. The tunnel cannot be used in the public space.

Содержание PEPPER PTF 4





































Отзывы: