EC2108V5
User Guide
3 Using the STB for the First Time
11
Step 2
Use the audio cable to connect the audio output ports (L and R ports) of the
STB to the corresponding audio input ports of the TV.
Step 3
Use the RJ45 cable to connect the Ethernet port of the STB to a 10/100 Mbit/s
Base-T Ethernet port on a wall or an xDSL modem.
Step 4
Insert the power plug of the STB into the power socket.
If degraded picture quality is observed while viewing copy-protected
VOD movies connect the set-top box directly to the TV set. Do not
connect through a VCR.
Starting the STB
To start the STB, perform these steps:
Step 1
Turn on the TV, and change the TV signal input mode to a correct mode such
as HDMI or AV.
For example, if the default TV signal input mode is HDMI and the STB is connected to
the TV using an AV cable, you must adjust the TV signal input mode to AV.
The method of selecting the TV signal input mode varies according to TV
vendor and model. For details, see the corresponding instructions in the
TV user guide.
Step 2
Turn on the power switch on the rear panel of the STB.