background image

6 IN. RANDOM ORBITAL 

POLISHER / SANDER

WARNING!

READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND 

WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO 

MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND 

WILL VOID WARRANTY.

Some dust created by power sanding contains chemicals  known to the State of California to cause cancer, birth defects or other  reproductive 

harm. An example of this type of chemical is lead from lead based  paints, Crystalline Silica from bricks and cement or other masonry, Arsenic 

and Chromium from chemically treated lumber. Your risk from these exposures varies, depending  on how often  you do this type of work. 

To reduce your exposure: work in a well ventilated area and work with approved safety equipment, such as dusk masks that are  specially 

designed to filter out microscopic  particles.

1 YEAR WARRANTY

PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers.  These 
warranties give specific legal rights. Except where prohibited by local  law, the law of the State of Washington 
governs all warranties and all  exclusions and limitations of warranties and remedies. There may be other rights 
which vary from state to state.

PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal  
use and service. A defective product may be returned for a free replacement  within 90 days from the date of 
purchase, provided that product is returned to  place of purchase immediately after discovery of defect. After 90 
days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge  any parts which 
our examination shall disclose to be defective and under  warranty. These warranties shall be valid only when a sales 
receipt showing the date of purchase accompanies the defective product or defective part (s)  being returned. For 
part (s) after 90 days, please remit your request, postage prepaid to: 

PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA  98138

These warranties exclude blades, bits, punches, dies,  bulbs, fuses, hoses, and other consumables which must be 
replaced under normal  use and service. These warranties shall not apply to any product or part which  is used for a 
purpose for which it is not designed, or which has been repaired  or altered in any way so as to affect adversely its 
performance or  reliability, nor shall these warranties apply to any product or part which has  been subject to misuse, 
neglect, accident or wear and tear incident to normal  use and service.

PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in 
connection with its products.

Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no 
express or implied warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes 
no implied warranty of merchantability and no implied warranty of fitness for any particular purpose, except that for 
goods purchased primarily for personal, family or household use and not for  commercial or business use, 
PERFORMANCE TOOL® makes an implied warranty of  merchantability (and, if otherwise applicable, an implied 
warranty of fitness  for a particular purpose), but only for the particular qualities or  characteristics, and for the 
duration, expressly warranted above. 
The laws on limitation of implied warranties may differ from state to state, so the  above limitations may not apply in 
all cases.

PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any 
manner related to any product, or to the design, use, or any  inability to use the product. The sole and exclusive 
remedy for a defective product or part shall be the repair, or replacement thereof as provided above.  The laws on 
limitation of remedies or on consequential, incidental or special damages may vary from state to state, so the above 
limitations may not apply in all cases.  

© Copyright 2019  WILMAR CORPORATION,  P.O. Box  88259  Tukwila, WA  98138

Item Number W50087

OWNER’S MANUAL

Содержание W50087







Отзывы: