PT AMC131, Руководство по оборудованию

Страница: 26 / 108

Chapter 2: Introduction
26
AMC Interface
The AMC131 is compliant with the AdvancedMC Advanced Mezzanine Card Base
Specification, PICMG® AMC.0 R2.0 . It is designed to be hot swappable into a mid-size or full-
size bay on a MicroTCA system or an AdvancedMC carrier board.
Note: The 1.5 GHz option is available only in full-size.
The AMC131 supports PICMG subsidiary specifications as shown in Table 2-2 :
Note: Build option 2 is reserved.
Quad Ethernet Port Architecture
Four 10/100/1000 Mbps RGMII Ethernet ports are supported by the onboard quad PHY. Two
ports are implemented as BASE-T/TX connections to front panel RJ-45 connectors to support
CAT5 cabling. Two ports are implemented as 1000 BASE-BX Ethernet connections to the
AMC131 connector. See
Figure 4-2, “AMC131 Connector Locations,” on page 47 .
Two 1000 BASE-BX Ethernet connections are used on ports 0 and 1. Table 2-3 provides the
Ethernet port mapping.
For 10/100/1000 BASE-T RJ-45 and AMC131 connector pinout, see Chapter 4, “Connectors,”
on page 43 .
Table 2-2: AC131 Supported PICMG Subsidiary Specifications
Types Supported
AMC.1 (PCIe)
AMC.2 (1GbE) AMC.4 (SRIO)
Build Option 1 Type 1 - 1x on Port 4
Type 2 - 2x on Port 4,5
Type 4 - 4x on Port 4-7
Type 8 - 8x on Port 4-11 E1 and E2 N/A
Build Option 3 N/A E1 and E2 Type 1 - 1x on Port 4
Type 3 - 1x on Port 6
Type 5 - 4x on Port 4-7
Build Option 4 Type 1 - 1x on Port 4
Type 2 - 2x on Port 4,5
Type 4 - 4x on Port 4-7 E1 and E2 Type 6 - 1x on Port 8
Type 8 - 1x on Port 10
Type 10 -4x on Port 8-11
Table 2-3: Ethernet Port Mapping
MPC8641D
RGMII Port Quad PHY
RGMII Port Quad PHY
Media Port RJ45 Front
Panel Port AMC Common
Options Port
TSEC{1} TXRX{1} TRD{1} FP{1}
TSEC{2} TXRX{2} TRD{2} FP{2}
TSEC{3} TXRX{3} SGIO{3} TXRX{0}
TSEC{4} TXRX{4} SGIO{4} TXRX{1}