15
PRO STUDIO FLASH KIT
10
Press the edges of the outer diffuser to the outside edges of the softbox and inner diffuser.
Using the modeling lamp
The modeling lamp provides a low light level so that in a dark environment you have enough light to set up the
camera and see the subject in the view finder. During the flash cycle, the modeling lamp turns off.
To use the modeling lamp:
1
Press the
MODEL
button to turn on the lamp. The modeling lamp indicator lights.
2
To adjust the lamp brightness, press and hold the
MODEL
button for two seconds. Your flash enters brightness
adjustment mode. Press the
S
or
T
button to increase or decrease the brightness. The brightness level appears
on the display.
The lamp has nine brightness levels from L1 (lowest) to L9 (highest).
Caution
Use insulating gloves when you handle the lamps. Oil from
your hands can damage the lamps.
Warning
Avoid using other diffuser materials or fabrics near the
modeling lamp. The modeling lamp can run very hot. Do
not operate the lamp for an extended time or unattended.
Note
The lamp automatically turns off after two hours to avoid
overheating.
Note
To protect the modeling lamp when you are not using it or
when your are storing, cover it with the lamp cover.
Modeling lamp indicator
MODEL button
S
(increase)/
T
(decrease) buttons
