4
、
Guidelines for Use
①
Scan QR code, download "Smart Life" APP, Install and apply the APP, prompt the registration
account according to its instructions.
②
Add equipment: Click add+, Select the other equipment, press
on top of controller for about
5 seconds until the indicator light flashes quickly, Then the smart valve controller enters the pairing
network state, according to the prompts to input WIFI password and other operations until the
pairing is successful.
③
The default state of the valve controller after pairing is closed , the controller can be switched as
needed. When the controller is opened, the indicator light is always on .Otherwise, When the valve
is closed, the indicator lights is off. You can manually press the button
to switch the valve,
or you can use the mobile phone APP to switch the valve. The product has setting functions such as
timing, sharing and linkage. Please read the description of APP in detail to use the product.
④
After successfully pairing, if the button is pressed about 5seconds again, the LED indicator light of
the smart valve controller will flash quickly, the original pairing information will be deleted, and the
pairing process will be carried out again. If multiple mobile devices are required to control the smart
valve controller, the sharing function of APP is adopted and allocated to multiple accounts.
⑤
In the absence of WIFI , The controller can control the valve to open or close by pressing the button ,
When the state of the smart valve is closed, it opens after the key, Otherwise when the valve is
opened, it closes after the key. When the power is cut off, the pull ring under the smart valve
controller can be manually pulled down and swing The Transfer handle to close or open the valve.
5
、
Failure Guide
①
The valve controller switch is not in place:
Check whether the smart valve controller axis center and the valve center axis are in the same axis.
if not in the same axis, not only make the valve switch not in place, but also burn the smart
valve controller ’s motor.
②
The valve switch is stuck:
you can pull down the clutch pull ring and Swing The smart valve controller ’s handle with 90
degree until the valve can be switched smoothly. If the valve is too tight, it is recommended to
replace the valve.
③
The smart valve controller can not be paired into the network:
Check the WIFI signal is OK, And when the smart valves controller is pairing into the network ,
please keep it as close to the router as possible.
④
For other troubleshooting problems, please read the APP’S help center in detail.
