Smart Valve controller Manual
1
、
Product Profile
Welcome to choose our company's WIFI smart valve controller,
This product has the characteristics of intelligence, low cost and
high reliability. It can be controlled by distance away, It adopts
WIFI international technology and is fully compatible with WIFI
network.
2
、
Product specifications
Power supply voltage 12V/1A
Communication technology WIFI
Frequency of communication 2.4g
Valve pressure 1.6 mpa
Valve specifications 4, 6, 1 inch, 1.25 inch
Close valve time 5-10 seconds
Open valve time 5-10 seconds
Torque 30-60 kgf.cm
Application System IOS/android
Application Valve type Handle valve
3、
Installation Guide
①
Install the bracket on the installation ear of the smart valve controller (screw is not tightened first).
②
Fix the mounting bracket on the water pipe or gas pipe (as shown in the figure).
③
Adjust the position of the smart valve controller, so that the output axis of the smart valve
controller is in line with the axis of the "water/gas pipe" valve handle. (Fig.) Then tighten the screw
at both ends of the mounting bracket. After the installation of the smart valve controller, Manually
pull down the clutch pull ring, Swing The smart valve controller Transfer handle,Check if the valve
switch is in place.
④
Tighten the screw of the smart valve controller handle clip according to the diagram
⑤
Connect the power adapter of 12V/1A.
