00042844.DOC, Version 1.0
17/20
Connections
Your speaker system is equipped with 4-pole, lockable Speaker sockets that are wired in parallel. You can
connect the input socket to the output on your power amplifier and tap into the signal from the amplifier on
the output connector, e.g. to feed this signal into an additional speaker system. For locking a connection turn
the plug to the right. For unlocking pull the unlock button and turn the plug to the left and pull it out of the
socket.
Connection Speaker socket
Information on installing audio cables
• A good cable run improves the sound quality remarkably. Avoid long cable runs.
• Always treat cables carefully and protect them from damages during transportation.
• Install cables always in a structured way and protect them from damage.
• Cables must be installed in a way that no person can stumble over them. Always fix cables with an
appropriate tape.
• Cables should be installed directly (no loops, S-shaped overlengths).
• Always install cables far away from power cables (never closely parallel).
• Never put heavy objects like speaker systems, flightcases etc. on cables.
• Never operate cables wound up.
INSTALLATION
Setting up
The speaker system can be set up as desired. The location must be solid, plane, anti-slip, vibration-free,
oscilation-free, and fire-resistant. The installation area must hold a minimum point load of 5 times the
system's load (e.g. weight 20 kg - point load 100 kg). The speaker system must never be installed higher
than 100 cm without secondary attachment.
Information on transport
For transport, the speaker system features two carrying handles. The speaker system should be carried
without force by two persons of the same size. Carrying the speaker system as one person alone should be
avoided as the high weight and the strain could lead to back damages and torsions. Please note that all
speaker systems with more than 25 kg weight must be transported with two persons.
Installing and orienting the speaker system
When installing the speaker system on e.g. a stage, microphones and turntables should always be located
behind the speaker systems. In this way, you can avoid dangerous and unpleasant feedbacks. If you cannot
install the speaker systems this way, the microphones and turntables should be located as far away as
possible from the speaker systems. When using the speaker system as monitor system make sure to avoid
feedbacks.
The speaker systems of a PA system are normally located left and right to the stage. Do not install the
speaker systems on the stage, but rather on appropriate tables or platforms in front of the stage.
In order to produce a clear sound, the speaker systems should be installed in a way that they throw the
sound over the audience's heads. A full-range speaker system should be installed at listeners' eye level.
Please refer to the safety instructions under Installation.
