Programming Instructions
Left Arrow Key-
The left arrow key is used to scroll thru screens 1 to 10. The screen
sequence will be repeated after screen 10. Note: The right arrow key does not scroll in
reverse.
Entering The Programming Mode-
The select key is used to
enter the programming mode on any screen. After pressing the
SEL
key a flashing block cursor will appear.
Move Cursor to the desired adjustment -
Use the up, down, left
and right keys to position the cursor on the digit to be adjusted.
Push The Select Key Again-
Press the select key again to enter
the adjustment mode. The flashing block cursor will change to a
flashing under-score
Adjust Value with UP-Down Keys-
Use the up, down keys to
adjust the value of the setting. You can scroll left and right to
adjust multiple digits in the same adjustment field.
Press The OK Key To Save-
Use the OK Key to save the
adjustments made.
Press The ESC Key To Exit Programming Mode-
Use ESC
Key to exit the programming mode to enable scrolling between
adjustment windows.
