Psion VH10, Руководство пользователя

Страница: 124 / 166

Chapter 5: Accessories
The MT43XX RAM Mount Kit
Psion VH10 Vehicle-Mount Computer User Manual
116
5.6.1 The MT43XX RAM Mount Kit
The VH10 may be installed using an articulating RAM Mount (Model MT43XX – 4 in. or 12 in. arm) secured to
either a Vesa or circular base.
The RAM articulating mount can be installed in a variety of orientations (see Figure 5.4). Select the best ori-
entation for your specific application. Preferred orientations maintain the centre of mass of the computer
assembly, directly over the centre of the base.
Figure 5.4 Orientation Of Vehicle-Mount Assembly
Figure 5.5 Tightening Tool P/N 9000594
The mounting platform on which you secure the computer must be strong enough to support 25 kg. Never
attach the mount to a plastic dash or a wooden platform without the appropriate backing plate and bracing.
When selecting a mounting location, you must provide the operator access at the top, bottom, and sides.
70°
15°
Important: The tilt and rotation of the computer can be easily adjusted by the operator. Make sure
that neither the operator or any equipment will be damaged if the handscrew is loosened
and the computer slips. Also note that under extreme vibration, the mount may slowly
‘settle’, requiring readjustment and tightening of the handscrew. Psion offers a tighten-
ing tool (P/N 9000594) that can be used to minimize settling.
Important: VH10f Freezer Model Installation
In order for sufficient drainage of the VH10f, the unit should sit at an angle of at least
30 degrees.