Psion 8585, Руководство пользователя

Страница: 40 / 106

Psion 8585/8595 Vehicle-Mount Computers User Manual
Chapter 4: Installing The Computer
Cable Cover (splash guard)
30
4.7 Cable Cover (splash guard)
Protection class
In order to comply with the certified protection class, please use the assembly kit included with the 8585.
Please observe the installation instructions included with this assembly kit.
4.8 Strain Relief
After the 8585 and bracket are fastened:
• Prepare the strain relief.
• Install the cables loosely on the strain relief rail.
• As far as possible, route cables leading to or away from the unit next to one another without crossing.
Completing:
• Fasten the cables to the strain relief rail.
• Be sure that the cables are fastened precisely at the positions at which the cable openings in the cable
cover are located.
4.9 Minimum Distance to WLAN Antenna
4.10 Antenna Cap and Service USB Interface
Under the antenna cap (protective cap) of the 8585, there is a Service USB interface.
Figure 4.2 Antenna cap 8585
To access this Service USB interface, you need to remove the antenna cap from the unit.
Caution:
Property
Damage For safety reasons, the supplied cable cover for the external ports must be installed prior to
using the 8585.
Caution: In order to avoid exceeding the limits determined by the FCC for exposure to radio
waves, you (and other people in your vicinity) should maintain a minimum distance
of 20 cm from the antenna integrated into the computer.
Please note this when mounting Psion industry computers with WLAN antennas.
Antenna cap
and Service USB interface