Psion Teklogix WORKABOUT PRO M/C, Руководство пользователя

Страница: 41 / 216

Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
15
Chapter 2: Basic Checkout
Preparing The WORKABOUT PRO For Operation
2.1 Preparing The WORKABOUT PRO For Operation
2.1.1 The Main Battery
The WORKABOUT PRO can be powered with one of the following battery packs:
• Standard Battery
• High-Capacity Battery, or
• 3 AA alkaline batteries.
2.1.2 Charging The Battery
Important: It is critical that you review the battery safety guidelines in “Lith-
ium Ion Battery Safety Precautions” on page 140 before charging
the battery.
Battery packs shipped from the factory are not charged. They must be fully charged
prior to use. Full capacity may not be reached until at least 5 full charge/discharge
cycles have been performed.
Batteries can be charged using a variety of chargers and docking stations along with
a Workabout internal charger. When using the internal charger, a suitable power
source is required. All chargers and docking stations are described in
Chapter 8:
Peripheral Devices & Accessories beginning on page 150.
2.1.3 The Internal Battery
To preserve data stored in your WORKABOUT PRO while you swap the main
battery, the unit is equipped with an internal battery – a standard Lithium Alloy
Manganese Dioxide coin battery – a Maxell ML2032. This battery is easily
accessible by removing the back cover of the unit.
2.2 Turning The WORKABOUT PRO On and Off
2.2.1 Installing The Battery And Switching The Unit On
• Turn the fasteners at the base of the battery cover counter-clockwise to
unlock the cover and remove it. The top of the stylus is shaped to help you
loosen the fasteners.
• Slide the charged battery into the unit. Replace the battery cover, and turn the
fasteners at the base of the battery cover clockwise to lock the battery in place.