Psion Teklogix Vehicle-Mount Computer 8255, Руководство пользователя, Страница: 166 / 348

Chapter 7:Setting Parameters
EAN 8
140
Teklogix 7035, 8255 & 8260 Terminals User Manual
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 133) must be set to “Y”.
An addendum is a separate bar code, supplementary to the main bar code.
This parameter provides three options:
Disabled, Options
and
Required
.
Depending on the value chosen for this parameter, an addendum is recognized
or ignored.
When “Addendum” is set to
Disabled,
the scanner does not recognize an
addendum. If this parameter is set to
Optional,
the scanner searches for
an addendum and if one exists, appends it to the main bar code. When the
parameter is set to
Required,
the scanner does not accept the main bar code
without an addendum.
7.6.3.4 EAN 8
Include Chk
If this parameter is enabled (set to “Y”), the check digit is included with the decoded
bar code data.
Size/Chars
See “Size/Chars” beginning on page 139.
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 133) must be set to “Y”.
Refer to "Addendum" on page 140.
Include Chk Y
Size/Chars »
Addendum Disable
EAN 8