Psion Teklogix netpad, Руководство пользователя

Страница: 10 / 11

Responsible party:
Psion Teklogix Inc.
2100 Meadowvale Blvd.
Mississauga, Ontario
Canada L5N 7J9
+1 905 813 9900
Infrared device safety:
CLASS 1 LED PRODUCT
This product includes an Infrared device for transmitting
and receiving files from devices supporting the IrDA
format. Although this invisible beam is not considered
harmful, and complies with EN60825-1 (IEC825-1), we
recommend the following precaution when the Infrared
device is transmitting:
• do not stare into the Infrared beam
• do not view directly with optical instruments
No parts in the device may be serviced by the user.
CE marking:
When used in a residential, commercial or light industrial
environment the product and its approved. UK and
European peripherals fulfill all requirements for CE
marking.
This product contains a laser scanner that emits less than
1.0 mW average radiant power at a wavelength of 650
or 680 nm. This product complies with 21 CFR 1040.10,
1040.11 and DIN EN 60825: July 1993, and is classified as
a Class 2 laser product.
FCC INFORMATION
FCC Information for the USA
Radio and Television Interference
This equipment radiates radio frequency energy and if
not used properly - that is, in strict accordance with the
instructions in this manual - may cause interference to
radio communications and television reception.
It has been tested and found to comply with the
limits for a Class B digital device pursuant to part
15 of the FCC Rules. These are designed to provide
reasonable protection against harmful interference in a
residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation distance between the
equipment and the receiver.
• If you are using the equipment with a mains adaptor,
plug it into an outlet which is on a different circuit from
that to which the receiver is connected.
• Consult an experienced radio/TV technician for help.
Important
This equipment was tested for FCC compliance under
conditions that included the use of shielded cables and
connectors between it and the peripherals. It is important
that you use shielded cables and connectors to reduce
the possibility of causing radio and television interference.
Shielded cables, suitable for the netpad, can be obtained
from an authorised Psion dealer.
If the user modifies the equipment or its peripherals
in any way, and these modifications are not approved by
Psion, the FCC may withdraw the user's right to operate
the equipment.
In the USA
For customers in the USA, the following booklet prepared
by the Federal Communications Commission may be of
help: “How to Identify and Resolve Radio-TV Interference
Problems”. This booklet is available from the US
Government Printing Office, Washington, DC 20402
Stock No 004-000-00345-4.
Emissions Information for Canada
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes
les exigences du Règlement sur le matériel brouilleur du
Canada.
FCC Declaration of Conformity
Product: netpad
Models: 16M/64M
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operation.
The Product is for home or office use.
netpad
user guide 16 17