3
SAFETY INSTRUCTIONS
1.
Read and understand instruction manual.
2.
NEVER
connect plug to power source until full assembly steps have been completed.
3.
Check that your supply voltage and grounding are correct.
4.
Do not use the lathe in a damp or wet location.
5.
Keep lathe clean and lightly oiled.
6.
Make sure the belt and pulley are adequately guarded at all times.
7.
Always remove any tools, chuck keys, toggle bars, etc. when you are finished with them.
8.
Keep the work area well lit and provide adequate ventilation and workspace.
9.
Keep young children and bystanders at a safe distance from the lathe.
10.
Do not force the lathe to do more than what it is designed to do.
11.
Do not wear loose clothing, jewelry, or neckties which could get caught in revolving parts. It is recommended that long
hair be restrained.
12.
Safety eye wear should be worn at all times. Also, it is recommended to a use of face or dust mask during lathe
operation.
13.
Attach all workpieces securely to the lathe, whether between centers, on face plates, or in chucks, etc.
14.
For best results be sure to keep tools sharp, clean, and free from rust.
15.
Use only three wire extension cords that have 3-prong grounding type plugs and 3-hole receptacles that accept the
tool's plug.
16.
Check the speed
BEFORE
mounting any material onto the lathe.
ALWAYS
start the lathe at a slow speed.
17.
Keep the door to the pulleys and belts securely screwed closed during lathe operation.
