4
Receiving Loose Parts
A
B
C
D
E
F
G
H
J
I
K
A. Tool rest (6in) and (10in) (Model TCLC12VS)
B. Faceplate (3in)
C. Spur Drive Center (#2 MT)
D. Hex wrench (set of 4)
E. Rubber feet (4) (if not installed)
F. Safety Goggles
G. Knock-out rod
H. Tool Caddy
I. Phillips Screw Driver
J. Live tailstock center
K. Tailstock Handle and bolt
RECEIVING:
1. Remove all parts and components from shipping carton. Remove all the packing and locate all loose parts.
2. Inspect the contents of the carton for shipping damage. Compare the contents of the loose parts list provided.
Report any missing or damaged parts to your distributor.
3. Keep the carton and packing material in case you need to pack and move the lathe.
4. Some metal surfaces on the lathe may have been treated with a protective coating prior to shipping. Clean
them with a soft rag prior to use. DO NOT use paint thinner, gasoline, or any other heavy solvents to remove
the protective coating or you will damage the lathe’s painted surface. Clean the lathe using only a damp cloth
or a very mild solvent.
