PSI Woodworking Products LCSET10 Скачать руководство пользователя страница 10

Страница: 10 / 10

#LCSET10

PSI Woodworking Products

Planing Cut with the Super Skew:

The shaft sits on the tool rest on one of the angled sides. The top of the blade should face towards the direction of the

cut with handle angled away from it (Fig. 23). Skim along the surface with the edge touching the wood and the tip of the

tool holder lifted slightly away (Fig. 24). As you make your pass, you should see the material coming off in thin ribbons or
threads.

The Super Skew can also be used to make grooves in a similar manner to the HSS Skew. By turning the Super Skew to

the side so the blade is vertical, thin lines can be cut with the corner.

Fig 23: Top of blade towards direction of cut

Fig 24: Holder tip slightly away from surface

#LCWIZ Super Skew

(continued)

WARRANTY

This chisel set is engineered and manufactured to the highest standards of quality. You will find this product an essential acces-

sory to your workshop. This chisel set is warranted against defects in material and workmanship for a period of two years for all

components. This warranty applies to the original purchaser of the product and is limited to the repair and/or replacement of the

product, or its parts at the discretion of PSI Woodworking Products. Excluded are use of the tools for purposes other than wood

turning or use with materials other than those appropriate for turning on a wood lathe. Also excluded are direct or consequential

damages to persons, properties, or materials. Your invoice serves as proof of purchase and must be referenced to authorize any

warranty repair.
Call your PSI dealer for proper authorization.

Содержание LCSET10










