8
Pan Switch
Each input channel is equipped with a pan switch. This pan switch routes the
post fader audio to either the Left or Right or Both summing amplifiers. The
switch is labeled “L and R”. If you move the toggle towards the “L” that
channels post fader audio will be routed to the Left summing amplifier and Left
main output. If you move the switch to the center position, that channels post
fader audio will be routed to both the Left and Right Summing amplifiers and
main outputs. If you move the switch toward the “R” that channels post fader
audio will be routed to the right summing amplifier and main output only.
Aux Send Switch
The auxiliary send switch is used to route individual input channel’s audio to the
auxiliary bus and output. This switch is labeled as “Pre and Post”. When this
switch is moved toward the “Pre” setting, pre-fader audio from that channel will
be sent to the aux summing amplifier and output. When the Aux switch is set to
its middle position, it is turned off and no audio will be sent to the auxiliary
summing amplifier and output. When this switch I set to the “Post” setting, post-
fader audio is sent to the auxiliary summing amplifier and output. The aux send
switch is typically used to route one or more input channels to the aux summing
amplifier and output. The auxiliary output is then used to feed a transmitter to
send audio to the boom operator or to send audio for other needs such as
feeding a Comtek transmitter to transmit audio to the director.
Direct Line Output:
Each input channel on the Solice Mini mixer is equipped with a dedicated direct
line output. This output can be used to feed multi-track recorders when
recording separate tracks for each actor. The direct line output is located on the
rear of the mixer and is labeled “Outputs” All eight direct line outputs are
available on one DB-25 connector. These dedicated line outputs can drive up to
a +22dBm signal for maximum headroom. These outputs use the same high
quality electronics as the main mini XLR outputs. Because of this, they offer the
same low noise and high headroom characteristics as the main outputs.
Channel Fader
The Solice Mini mixer is equipped with long throw (100mm) faders. These faders
offer a full range of control over your audio signals. The channel faders offer
approximately 70dB of control range at your finger tips. The mixer overlays are
labeled with coarse lines marked with 5dB and 10dB increments under the fader
knobs for operator convenience. Recommended normal operating range is at
