(15.785cm) spacing and batteries that have the Positive (+) terminal located on the
left top side of the battery and Negative (-) terminal located on the right top side of
the battery. Mounting this device to batteries with other terminal spacing is not
permitted under any circumstance as it is not designed to be used that way.
2.
Make sure the battery you have has the standard terminal polarity. With the battery
located so that the terminals are facing toward you, the positive terminal must be
located to the left side of the battery and the negative terminal must be located to the
right side of the battery. Double check the battery polarity matches the polarity sticker
on the PSC unit before proceeding.
3.
If using 6mm TERMINAL STYLE BATTERIES, you must install the supplied 6mm Brass
adaptors to the battery before proceeding. Please note that the part that screws down
onto the 6mm battery terminal is slotted to allow overall terminal width adjustment.
Please install the brass terminal adaptors so that the vertical brass battery post is facing
toward the front of the battery and so the center line distance between the post holes
measures approximately 6.250” (15.9cm)
4.
Remove the two thumb screws from the unit by gently turning them counter-clockwise
until they are free from the unit.
Thumb Screws removed from unit.
5.
Carefully note the orientation of the PSC PowerStar Element in relationship to the
battery terminals. There is a colored sticker on the front edge of the PSC PowerStar
Element to help you locate the unit correctly over the terminals. The Positive (RED +)
terminal on the battery must connect to the Positive terminal on the PowerStar
Element. The Negative (BLACK -) terminal on the battery must connect to the Negative
terminal on the PowerStar Element.
