PSC Falcon PT40, Руководство по продукции

Страница: 41 / 122

Using PALPRO40 to Collect Data
Product Reference Guide
2-17
screen, and the PT40 is ready to accept another ID for an item at the
current location.
9. When finished collecting ITEM IDs for the location, press the
<F4>
key
to return to the prompt for the LOCATION ID.
10. Repeat steps 5 through 10 until all the IDs for the ITEMs at every loca-
tion are collected.
11. Press the
<F4>
key again to return to the menu shown at step 4.
12. To change from check-in to check-out (or vice versa), repeat step 4.
• Otherwise, press the
<F4>
key to return to the application menu.
Refer to
Uploading Data to the Host PC starting on page 3-2
to upload your data.
The PT40 stores check-in data in one ASCII text file and check-out data in
another file. When uploading one of the files to the PC, the data appears as a
list. Each line in the list contains two fields separated by a comma. The first
field is the LOCATION ID, and the second field is the ITEM ID.
When using the date/time stamp, each line also includes the check-in or
check-out date and time. The list shown in
Figure 2-10
is part of a check-out
file uploaded from a PT40 that used
TRACKPRO
with the date/time stamp.
Figure 2-10. TRACKPRO Collected Data in ASCII text file
ITEM ID
¤
IN :MAIN,P203
F3=REV F4=EXIT
If the application is set up to add a date/time stamp, the date and time that the item
was checked out will follow the item ID on the third line. (You must scroll the
display to see the entire line.)
MAIN,R44-2173,10/16/02,10:27:18
MAIN,R44-2260,10/16/02,10:27:45
MAIN,R44-2278,10/16/028,11:04:51
MAIN,R44-2283,10/16/028,11:22:02
WHS,R44-2285,10/16/028,11:40:53
WHS,R44-2287,10/16/028,11:40:57
WHS,R44-2289,10/16/028,11:41:11
WHS,R44-2314,10/16/02,11:41:15
2340.book Page 17 Wednesday, January 29, 2003 12:50 PM