
11.125"
283mm
4"
102mm
9.875"
251mm
•
Platinum-derived 8” woofer and 1” t weeter
•
Unique high-frequency, constant directivity SonicGuide™
gimbals to provide a focused, even response both on and off
axis
•
SonicGuide™ can be tilted 30° left or right and the whole
assembly turned through 90 degrees
•
Fully enclosed back box NCB available
•
Midrange and t weeter switches allow for response
adjustments
Frequency Range (-6dB):
38-21,000Hz
Recommended Power:
20-100 Watts
Impedance:
4 Ohms
Sensitivity (1W (2.83V) @1m)
Anechoic Chamber:
88dB SPL
Typical Listening Room:
90dB SPL
Drivers:
8” Woofer
1” Dome Tweeter
Overall Dimensions (W x D):
11 1/8 diameter x 4”
Cut-out Dimensions (W):
9 7/8” diameter
Overall Dimensions (W x H x D):
11 1/8 x 11 1/8 x 4”
Cut-out Dimensions (W x H):
9 7/8 x 9 7/8”
CW180R / CW180S 8” Coaxial Speaker System
w w w. p s b s p e a k e r s . c o m
1 8 8 8 7 7 2 0 0 0 0
PSB Speakers reserves the right to change specifications or features without notice.
© 2004 PSB Speakers, a division of Lenbrook Industries Limited.
PSB is a registered trademark of Lenbrook Industries Limited. Printed in Canada 09/04. All rights reserved.
No part of this publication may be reproduced, stored or transmitted in any form whatsoever without the written permission of PSB Speakers.
• Try to install the systems at a height
bet ween seated and standing ear level.
• Distance bet ween left and right speakers
should approximately equal the distance from
the listening area to the wall or ceiling.
• Make small exploratory hole and check for
obstructions in wall cavity before cutting
mounting hole.
• Use template provided and carefully mark and
cut mounting hole.
• Lightly fi ll wall cavity with fi berglass for 2
feet above and below system (CW180S). Use
standard 4” fi berglass split to half thickness.
Use 1” thick fi berglass behind system.
• Adjust electric screwdrivers to appropriate
torque. Tighten 4 mounting screws fi rmly but
do not over tighten!
• SonicGuide t weeter can be - 45
degrees via the gimbal ring, then +- 30
degrees on its axis.
• Aim t weeter toward center of listening area.
• Switches give subtle balance adjustments
for midrange and treble. Set to suit room
acoustics and listener taste.
• See manual for more installation hints.
Installation Notes
11.125"
283mm
4"
102mm
9.875"
251mm