9
10
10
8. ID CARD PROGRAMMING
This kit includes four pre-programmed cards.
1 x Adding Card
1 x Deleting Card and
2 x User Cards
Follow the below steps to add, delete or re-program add/delete cards
Adding User Cards:
Step 1: use the adding card to touch the ID card touching zone of the outdoor station.
Step 2: use the user card to touch the same area.
Step 3: use the adding card to touch the same area. Then the new user card is successfully added. At most
1000 user cards can be added.
Deleting User Cards:
Step 1: use the delete card to touch the ID card touching zone of the outdoor station.
Step 2: use the user card to touch the same area.
Step 3: use the delete card to touch the same area. Then the user card is successfully deleted.
Re-programming Add/Delete Cards:
If the user loses the adding card or delete card, he or she can re-program a new cards by following these steps:
Step 1: open the back cover of outdoor station.
Step 2: please turn off the power, and let the ID unlock PCB jumper wire to be SET condition.
Camera
Speaker
Infrared Light
Microphone
Call
Connection
Terminals
Name Plate
ID Card
Touching Zone
S
E
T
R
U
N
ID Unlock PCB
Step 3: turn on the power, and use two ID card to touch the ID card touching zone of the outdoor station
accordingly. If there is a long ring sound after the second ID card touching, the re-setting is successful.
Step 4: turn off the power, and let the jumper wire to be RUN condition. The first ID card will be adding card,
and the second will be delete card.
