PSA LIF6000WB Скачать руководство пользователя страница 18

18

9. Warranty and Liability

1. PSA Products Pty Ltd (ABN: 99 076 468 703) of 17 Millicent Street, Burwood 3125 Victoria, 

Australia warrants this product for a period of five (5) years from the date of purchase, as 
reflected on the Authorised Reseller’s or Distributor’ invoice / receipt provided to you. PSA 
Products Pty Ltd will repair or replace the product (at the option of PSA Products) due to any 
manufacturing defect, at the cost of PSA Products Pty Ltd (excluding any labour costs relating to 
removal or re-installation of product, and transport costs).

2.  This warranty shall not apply to the product if it has been damaged, modified, abused or altered 

after the date of purchase, or if it fails to operate due to improper maintenance.

3.  To the extent permitted by law, the liability of PSA Products Pty Ltd arising from the sale or under 

the terms of this limited warranty shall not in any case exceed the cost of replacement and subject 
to this clause. In no case shall PSA Products Pty Ltd be liable for consequential loss or damages 
resulting from the failure of the product or breach of this, or: Any other warranty, express or 
implied, loss or damage caused by failure to abide by the instructions supplied in the leaflets.

4.  To the extent permitted by law, PSA Products Pty Ltd., makes no warranty, expressed or implied, 

written or oral, including that of merchantability or fitness for any particular purpose, with respect 
to the consumer replaceable battery if any. A product with non-serviceable built-in battery is 
covered under warranty of the product.

5.  This warranty is provided in addition to other rights and remedies you have under law: Our goods 

come with guarantees that cannot be excluded under the Australian Consumer Law. You are 
entitled to a replacement or refund for a major failure and compensation for any other reasonably 
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the 
goods. fail to be of acceptable quality and the failure does not amount to a major failure. What 
constitutes a major failure is set out in the Australian Consumer Law.

6  To make a claim under warranty, take the product (with a proof of purchase) to the store 

where you purchased the product or contact PSA Products Pty Ltd. Phone (03) 9888 9889. or  
Email: [email protected] with details, proof of purchase or expense claim in writing.

Содержание LIF6000WB





















Отзывы: