7
7. WIRING & MAINTENANCE INSTRUCTIONS
Door Station Terminal Legend:
1
= Audio Wire
2
= Ground Wire
3
= Video Wire
4
= Power Wire
5
= Lock + (12VDC 500mA)
6
= Lock -
7
= ID (used only for door station with proximity reader)
Indoor Monitor Terminal Legend:
1 = Audio Wire
2 = Ground Wire
3 = Video Wire
4 = Power Wire
5 = Ground Wire (used with 2 Door Controller Only)
6 = Monitoring Wire (used with 2 Door Controller Only)
7 = ID (used only for door station with proximity reader)
8 = Lock = Normally Open Contact (9 - 30VDC 2A)
Cable Specifications:
• 0 to 30m: minimum CAT 5 or 4 Core Stranded 0.50mm
2
• 30 to 80m: minimum 4 core Stranded 0.75mm
2
1. To avoid any interference, all intercom cables should maintain 50mm separation from 240VAC wires
2. Never install door camera directly facing sunlight. This will create a white image on indoor monitor
and may damage the camera lens over time.
3. Do not install the monitor or power supply in areas of high temperature or high humidity.
4. To clean the monitor or door camera, use only a damp soft cloth. Do not use cleaning agents,
chemicals or spray directly with water.
5. Please note, nearby wireless devices may cause fuzzy pictures due to interference from radio waves.
