PS Engineering
PMA8000BT Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-890-0702
Page 3-12
Rev. 1, Oct. 2010
3.12.4 Bluetooth music control
The PMA8000BT can control some Bluetooth music devices. When the music is playing, press and hold
the “Function” button (TEL), and push the desired music function button.
Play/Pause (TEL and Nav 1)
Skip Backward (TEL and Nav 2)
Skip forward (TEL and MKR)
NOTE: Due to the variety of Bluetooth devices and capabilities, PS Engineering does not guarantee that
the PMA8000BT Bluetooth interface will work the same way in all devices. Visit
ps-
engineering.com/support
for more information on tested models.
3.13 Internal Recorder
The PMA8000BT comes equipped with an internal recorder. This digital system stores the last incoming
audio from the radio you have selected for transmit. It can store as many of 8 incoming messages, and up
to 60 seconds of audio. The pilot and copilot hear the playback. It is also possible to modify the unit to
exclude the copilot from the playback, and annunciation playback. Contact PS Engineeri ng, for more de-
tails.
3.13.1 Playback
Recording is automatic. To play back the last recorded message, press and hold the COM Receive
pushbutton associated with the selected radio transmitter for about one (1) second. You can either wait for
the message to finish playing before accessing the prior message, or cancel the current playback and step
backward. To cancel the playback, press and hold the COM receive playback button for two seconds (2).
The next time the button is pressed for one (1) second, the next earlier message will be heard.
The play-
back will stop whenever there is more incoming selected com audio, and the message can be re-
played from the beginning by pressing the selected Com Receive button again for 1 second.