Page 6
202-228-0300 PAR200B
Pilot Guide
4.
When a frequency has been saved, the
Sav
button becomes
Rcl
for Re-
call.
5.
Use knob to select save location if desired. Push “Save” to overwrite or
Insert to insert in new location.
6.
Continue to enter frequencies as desired, then hold the
Rcl
button for 1
second, until the display switches to the “Save” as shown.
To recall stored frequencies:
1.
Press the center line-select button next to the
Rcl
icon.
2.
Using either of the knobs, select the desired location.
3.
Push the center line-select button to accept this as
Active
frequency
.
Tuning 8.33 kHz channel Spacing
Hold the top line select button for
1 second, which will show the
radio menu. Press again to toggle
between either 25 kHz spacing or
8.33 kHz spacing. This will be
indicated on the OLED screen
when the trailing digit on the
0.000 MHz is full size. As in the
PAR200A, if the ICS button is
held for 1 second, the radio menu
will also appear.
