PS Audio Stellar Strata, Руководство пользователя для владельца

Страница: 13 / 36

Trigger Output The Stellar Strata Amplifier has a trigger output for remotely controlling another power amplifier
or other equipment. This trigger output is approximately 9VDC and can deliver up to 40mA.
This is compatible with the trigger inputs on all PS Audio equipment and many other devices.
There is a time delay between when the Stellar Strata Amplifier is activated and when the trigger
output is turned on. This delay can be adjusted in the Settings menu.
Stellar Strata Amplifier
Getting Started
®
Powering On
Your Stellar
Strata
Once the unit is connected to power, flip the master power switch on the rear panel to the On
position. The PS Audio logo LED button on the front panel will glow blue when the unit is
powered on and ready for use.
Connecting The
Speaker Cables
The Stellar Strata Amplifier uses custom machined connectors. These connectors accept spade,
banana, or wire connections.
WARNING! Never connect speaker cables while the amp is on. Turn off the amplifier using the
switch on the back panel before making the speaker connections.
Idle Mode The master power switch on the rear panel should remain on at all times. When your connected
equipment is not in use, the Stellar Strata can be placed in Idle mode. Putting your unit in Idle
mode will deactivate all of its output relays.
Idle mode can be activated/deactivated by pressing the PS Audio logo button, located on the
upper left hand corner of the Strata front panel. When the logo button is not lit, the Stellar Strata
is in Idle mode. Idle mode can also be activated/deactivated by pressing the On/Off button in the
top left hand corner of the remote.
CAUTION: Activate Idle mode before powering down your unit using the rear panel master
power switch.
Connecting a
Subwoofer
The Stellar Strata Amplifier is a balanced amplifier. This means that both the positive and
negative speaker terminals are driven by the amplifier. THE BLACK TERMINALS ARE NOT
GROUND. Do not connect the black terminals to each other or any other ground signal.
NOTE: Some powered subwoofers require a ground connection. There is a separate ground
binding post on the back of your amplifier for this purpose.
12