4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 [email protected] www.psaudio.com
Quick Start Guide 7
®
Quick Start Guide
©2010 PS Audio International Inc. All rights reserved.
Owner’s Reference
PerfectWave Transport
Remote Control
The “
ON
” and “
OFF
” buttons are at the top of the remote. Use them to turn the PWT
ON
and
OFF
. The rear panel AC power switch must be on for this to work.
Right below the section labeled “
DAC
” is a numeric keypad. This is used for selecting a track
number directly. To the left of the “0” button is a button to select
REPEAT
modes. Push once for
REPEAT TRACK
. Push twice for
REPEAT ALL
and push a third time for
REPEAT OFF
.
The display on the PWT will reflect all the remote control selections.
Directly below, there are four buttons. From the left, these are;
STOP, EJECT, REWIND and
FAST FORWARD
. Below that is a circular control. The center button is for
PLAY/PAUSE
. To the
left is the
PREVIOUS TRACK
button and to the right is the
NEXT TRACK
button.
The top of the large center ring is for
VOLUME UP
and the bottom is for
VOLUME DOWN
,
which apply only if you have a PerfectWave DAC.
