®
Configuring
Speaker Feet
6
aspen FR20
Now that the box is removed, take the packaging foam off the top and place it to the side of
the speaker (you can use it as fulcrum when it’s time to move the speaker). Now the spiked
feet are exposed.
For hard floors:
The spiked tips on the feet are not meant for hardwood and could scratch your floor. Twist
to remove the bottom 0.375” spiked tip from each foot. The black plastic disc underneath is
now exposed. You can now flip the speaker out of the packaging and into place. You should
be able to slide around on the small plastic feet.
CAUTION: This is a two person lift. Do NOT lift alone.
For carpeted floors:
Leave the spikes in place and flip the speaker out of the packaging. It should be standing on
its spiked feet.
CAUTION: This is two person lift. Do NOT lift alone.
We have provided carpet sliders. T
his way, the speaker can be easily slid around during
initial listening and setup. To use these, remove the spiked tips and screw in the carpet
sliders. When the final speaker location is determined, replace carpet sliders with the spiked
tips for best performance.
Getting Started
