Continued from page 4
* Place the BT-PTT near the PRYMEBLU Mobile Adapter and wait. Within a few seconds, the devices
should synch to each other.
* Once paired, the LED on Mobile Adapter will change to a long blue flash followed by a single
blue flash every few seconds. The LED on the BT-PTT will also show a quick single flash every
second.
* If the PRYMEBLU Mobile Adapter does not detect a compatible BT-PTT within sixty seconds of
being put into pairing mode, the adapter will exit the pairing mode and resume normal operation.
* Power on the wireless Headset that you previously paired to the PRYMEBLU Mobile Adapter.
Within a few seconds, the headset and adapter should reconnect.
* Once the adapter, wireless Push-to-Talk, and headset have connected to each other, you can
power on the amateur mobile radio.
Reconnecting to a Previously Paired Headset / PRYMEBLU PTT
Once the PRYMEBLU Mobile Adapter has been successfully paired to a wireless Headset or
PRYMEBLU BT-PTT, it will remember those connections. If the headset or BT-PTT is powered off or
loses connection, the adapter will attempt to reestablish the connection. The adapter and
headset/BT-PTT will attempt to reestablish their link whenever when the devices are powered on
and in within range of each other. Re-establishing this connection can take 10-60 seconds.
STEP SEVEN: Transmit and Receive Operation
Push-to-Talk can be activated by any of the following methods:
* Pressing and holding the Multifunction button of the PRYMEBLU Mobile Adapter
* Pressing and holding the PTT button on the PRYMEBLU PTT (if a BT-PTT is paired to the Mobile
Adapter).
* Pressing and holding the button on the external Push-to-Talk/Footswitch (if one is plugged into
the Mobile Adapter).
When transmitting, the operator’s voice is picked-up by:
* The microphone in the wireless Headset.
* Note that the radio’s hand microphone can be used as a back-up. Pressing and holding the PTT
button on the hand microphone will cause the radio to transmit and the operator’s voice will be
picked up by the hand microphone.
When receiving signals:
* Receive audio can be heard over both the radio’s internal speaker or over the earphone in the
wireless Headset.
* The volume control knob on the radio controls the internal speaker volume only. If you do not
wish to hear received signals over the internal speaker, simply set the radio’s volume to zero.
* The volume of the earphone can be controlled using the Volume Up/Down buttons on the
wireless Headset.
STATUS LED MESSAGES
The meanings of the various status LED messages shown by the PRYMEBLU
Mobile Adapter are shown on the following table:
LED INDICATION
One flash every 4 seconds
Two flashes per second
Three flashes per second
One long flash for three seconds
No indication
MEANING
Normal operation
Headset pairing mode active
PTT pairing mode active
Successfully paired or re-paired
Radio is turned off or no power is being
supplied to the adapter
TROUBLESHOOTING
My Wireless Headset or PRYMEBLU Push-to-Talk will not pair with the PRYMEBLU Adapter.
Try re-pairing the PRYMEBLU Mobile Adapter and wireless accessory following the instructions
in this guide. Make sure that the PRYMEBLU Mobile Adapter and accessory being paired are
within one meter of each other. If possible, isolate them from other wireless devices such as
phones, laptops, etc. that might interfere with the pairing process.
My Wireless Headset or PRYMEBLU Push-to-Talk worked with the PRYMBLU Adapter
previously, but is not working now.
Make sure that the PRYMEBLU Mobile Adapter is properly connected to the amateur radio and
that the adapter has power supplied to it. Ensure that your wireless audio accessory has a fully
charged battery and is turned on. If the devices will still not work, re-pair the PRYMEBLU
Mobile Adapter to the wireless accessories.
I can transmit using the Multifunction Button on the PRYMEBLU Mobile Adapter and
transmit audio is picked up from my wireless Headset; however the PTT button on my
PRYMEBLU Push-to-Talk does not key the radio.
Your PRYMEBLU BT-PTT is not properly paired with the PRYMEBLU Mobile Adapter or has
come un-paired. Try pairing the adapter and BT-PTT again.
I can transmit using the Multifunction Button on the PRYMEBLU Mobile Adapter or the PTT
button on the PRYMEBLU Push-to-Talk but no microphone audio is being heard.
Your wireless Headset is not properly paired with the PRYMEBLU Mobile Adapter or has come
un-paired. Try pairing the adapter and headset again.
I have my PRYMEBLU Mobile Adapter plugged into my Mobile Two-Way radio but when I
turn the radio on, the LED on the adapter does not light up.
Check the connections to the external DC power supply and ensure that the power supply is
turned on.
SUPPORT AND WARRANTY
PRYME Radio Products warrants this product against defects in materials or workmanship for a
period of one year from the date of retail purchase. PRYME will repair or replace a defective
unit, at our option, without charge for parts or labor. The limited warranty is extended only to
the original purchaser and is valid only to consumers in the United States and Canada. It does
not cover damage or failure caused by or attributable to Acts of God, abuse, misuse, improper
or abnormal usage, faulty installation, improper maintenance, lightning, or other incidences of
excessive voltage, or any tampering or repairs by other than a PRYME authorized repair
facility. It does not cover replacement of consumable parts, transportation costs, or damage in
transit.
Repair or replacement under the terms of this warranty does not extend the terms of this
warranty. This warranty can only be modified by an officer of PRYME Radio Products, and then
only in writing. Should this product prove defective in workmanship or material, the
consumer’s sole remedies shall be such repair or replacement as provided by the terms of this
warranty. Under no circumstances shall PRYME Radio Products be liable for any loss or
damage, direct, consequential, or incidental, arising out of the use of or inability to use this
product. Some states do not allow limitations on how long an implied warranty lasts or the
exclusions or limitations of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights. You may also
have other rights, which may vary, from state to state.
For support or warranty service on your PRYME product, contact us at 1-800-666-2654 or visit
us on the web at www.PRYME.com.
COPYRIGHT AND TRADEMARK INFO
© 2021 PRYME Radio Products, Brea CA. All rights reserved.
PRYME® and PRYMEBLU™ are trademarks owned by PRYME Radio Products. All other product or
service names are the property of their respective owners.
DISCLAIMER: The BT link used in this product is an open standard, unsecured technology. As
such, it is not recommended for first-responder or other mission critical users.
6
5
7
8
SPECIFICATIONS
Operating Temperature:
Weight:
BT Module:
Audio Line Input:
Audio Output:
Transmitted Power:
Receiver Sensitivity:
Supported BT Operating Profiles:
DC Input:
DC Current Draw (average):
DC Current Draw (maximum):
-20° C to +50° C ± 2°
30g approximate
Fully Qualified BT v2.1+EDR Chip set
350 mVrms (maximum)
20 mVrms
1 dBm (typical)
-82 dBm (typical)
HSP, HFP, SPP (for Push-to-Talk).
12 VDC
13 mA
120 mA
